Newsletter
Butik forside > IoT > Wired > Sensors > Temperature/Humidity
Filtre
 
Viser alle 3 produkter
 

Temperature and Humidity Sensor String (8) Sensors for AlertWerks

(1 varianter)
Temperature and Humidity Sensor String (8) Sensors for AlertWerks
Detect hot spots in your cabinets and protect your IT equipment with this easy-to-install sensor string. Læs mere…
Starter ved: kr 1.564,00

Temperature and Humidity Sensors for AlertWerks

(2 varianter)
Temperature and Humidity Sensors for AlertWerks
Monitor temperature and humidity with this unit. Læs mere…
Starter ved: kr 769,00

AlertWerks Calibrated SNMP Temp/Humidity Sensor - 984 ft. (300 m) via CAT5, 5-ft. (1.5-m) Cable Included

(1 varianter)
AlertWerks Calibrated SNMP Temp/Humidity Sensor - 984 ft. (300 m) via CAT5, 5-ft. (1.5-m) Cable Included
Remote temperature/humidity monitoring. Network-enabled SNMP temperature/humidity sensor with calibration check fits in one AlertWerks Gateway port Læs mere…
Starter ved: kr 1.374,00
 



 
Top Products
Boxilla® KVM Manager  
Boxilla® KVM Manager
(6 varianter)
Create a high performance KVM Matrix system, monitor and get full control of thousands of endpoints.
KVX Series KVM Extender over CATx - 4K, Single/Dual-Head, HDMI, USB 2.0, Serial, Audio, Local Video  
KVX Series KVM Extender over CATx - 4K, Single/Dual-Head, HDMI, USB 2.0, Serial, Audio, Local Video
(2 varianter)
Extend KVM signals up to 100m over CAT5/6 cable.
KVX Series KVM Extender DIN Rail Mounting Kit  
KVX Series KVM Extender DIN Rail Mounting Kit
(1 varianter)
Mount any KVX Series Extender on a DIN rail
Emerald® Rackmount Bracket for (3) SE or PE Unit KVM Extenders  
Emerald® Rackmount Bracket for (3) SE or PE Unit KVM Extenders
(1 varianter)
Rackmount up to three Emerald® SE or PE DisplayPort KVM Extenders in 1U.
DKM Modular Basic Link Modules  
DKM Modular Basic Link Modules
(68 varianter)
DVI-D and USB HID receiver module for DKM Modular KVM Extender Housing Chassis.
KVM CPU Cables DVI-I and USB  
KVM CPU Cables DVI-I and USB
(3 varianter)
Choose this 2-in-1 cable to link two DVI/USB devices together.
ServSwitch EC USB Server Cable  
ServSwitch EC USB Server Cable
(3 varianter)
For linking USB servers to your ServSwitch EC series KVM switches.
DT DisplayPort KVM Switch, 2-/4-Port  
DT DisplayPort KVM Switch, 2-/4-Port
(2 varianter)
Combine DisplayPort KVM Switching with audio and USB peripheral sharing in one unit
CX Series Server Access Module - VGA, USB or PS/2  
CX Series Server Access Module - VGA, USB or PS/2
(3 varianter)
Connect USB servers to the ServSwitch CX, ServSwitch CX Uno, or the ServSwitch CX with IP.
Freedom II KM Switch with Glide & Switch Mouse Switching  
Freedom II KM Switch with Glide & Switch Mouse Switching
(2 varianter)
Switch between separate computer systems simply by moving a mouse cursor from monitor to monitor.
Vis alle