Temperature and Humidity Sensors for AlertWerks

In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
Monitors temperature and humidity on a single intelligent sensor port
Own SNMP OID for data collection via a network

Setup is simple with the ServSensor Junior and ServSensor V4E autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

Certifications — RoHS and WEEE
Measurement Accuracy Celsius — Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Accuracy Fahrenheit — Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF
Measurement Range — -40° to +75°C Temperature, 0 to 100% Relative humidity
Measurement Resolution — 1°F for ServSensor Junior and 0.1° for for the ServSensor V4E units for temperature. 1% for the ServSensor Junior and 0.1% for the ServSensor V4E units for humidity.
Temperature Status OID — 1.3.6.1.4.1.3854.1.2.2.1.16.1.4.X
Sensor Type — semiconductor microprocessor controlled
Communications Cable — RJ45 jack to temperature sensor using UTP Cat5 wire
Sensor Type — semiconductor microprocessor controlled
Power Consumption — Typical 10.70 mWatt, 2.14mA ServSensor Junior autodetects the presence of the temperature sensor. Typical 7.25 mWatt, 1.45mA for humidity
Power Source powered by ServSensor Junior. No additional power needed