ControlBridge® Processor

Simple, one-touch control
With the ControlBridge® Processor 100, you can control everything in small to mid-sized conference rooms, classrooms, training centers, and control rooms. Use the ControlBridge® Processor 200 to control everything in medium to large applications.
When making presentations, ControlBridge® enables you to focus on the objective, not the technology. Instead of fumbling around trying to set up projectors, sound systems, and other equipment, all you need to do is push a button or swipe a touch pad. Plus, PoE capability eliminates worries about power supplies.

The ControlBridge® Processor gives you multiple ways to control devices.

• Control Ethernet-enabled devices with Touch Panels.
• With the Mobile Device License, you can even use your tablet or smart phone.
• With the Wired Desktop Button Panel.
• Via the convenient In-Wall Button Module
• With IR remote control transmitters because the Processor and Touch Panels have IR receivers.

Control everything—the new and not-so-new
Because the ControlBridge® Processor sports so many different types of ports, you can connect almost anything. Bidirectional serial RS-232/422/485 ports enable you to connect modern KVM equipment as well as older AV equipment with serial interfaces. You can even use ControlBridge® to simplify operation for existing technologies you’re already using.

You’ll also get general I/O ports that can be configured as analog inputs or digital outputs and 24-volt relay outputs. Use them to automate equipment such as screens, lights, window shades, sound systems, and more.

Input modes include:

• Digital input for free contacts, pushbuttons, switches, digital input 24V, energy meter outputs, and more.
• Resistance for temperature sensors, resistors, and other meters.
• Voltage input sensors.
• Current-loop passive input.

Output modes include:

• Digital output collector for relay coils, LED indicators, etc.
• Current-source pull-up and pull-down.
• IR output.
• Serial output.

Inas analog inputs or digital outputs and 24-volt relay outputs. Use them to automate equipment such as screens, lights, window shades, sound systems, and more.

With ControlBridge®, you can control:
• AV systems
• KVM systems
• Displays
• Projectors and screens
• DVD and CD players
• Volume
• Temperature
• Lights
• Any IP-enabled device

These products work with:

• ControlBridge® Wired Desktop Touch Panels (CB-TOUCH7-T, CB-TOUCH12-T)
• ControlBridge® Wired Desktop Control Panel – 8-Button (CB-KEYPAD-208-T)
• ControlBridge® Wallmount Control Module – 8-Button (CB-KEYPAD-1G-08)
• ControlBridge® IR Emitter (CB-ACC-IR-UNI): Control AV and other devices equipped with IR sensors, included 2m Infrared emitter cable is compatible with devices with IP interfaces.
• ControlBridge® Mobile Device License - Single (CB-APP-LIC)
• ControlBridge® Serial I/O Cable for DTE Connections (CB-ACC-232DTE-30): Connect AV, KVM, and room automation equipment with RS-232 serial interfaces. The 3m-cable has one DB9 male connector and one 5-pin, 3.5-mm connector.
• ControlBridge® Serial I/O Cable for DCE Connections (CB-ACC-232DCE-30): Connect AV, KVM, and room automation equipment with RS-232 serial interfaces. Cable has one DB9 female connector and one 5-pin, 3.5-mm connector.
• ControlBridge® Power Supplies (CB-PS-12V, CB-PS-24V)
• ControlBridge® 19” Processor Mounting Shelf (CB-CP-RMK): 1U shelf can hold one 19” wide unit, two half-rack width units, or four quarter-rack width units.

Connectors —
CB-CP100:
Network: RJ-45;
Control ports Phoenix 3.5 mm:
(3) Bidirectional serial RS-232/422/485 3-pin; (8) Versatile, 2-pin, Input protected to 30 VDC
Enclosure— Aluminum, IP20

Indicators —
LEDs
CB-CP100: PWR, Link, CPU, (3) Serial, (8) Versatile
CB-CP200: PWR, Link, CPU, (2) serial, (4) IR/Serial, (4) General I/O, (2) Relay

IR Sensor —
CB-CP100: (1) IR code capture
CB-CP200: (1) IR code capture; (1) receiver for wireless control panels

Memory —
CB-CP100: Internal RAM/Non-volatile flash: 64 MB/256 MB
CB-CP200: Internal RAM: 256 MB; Internal microSD card: 4 GB min.

Network — 10/100BASET (wired)


Power — 24 VDC, 4 W external power supply, IEEE 802.3 af PoE compatible

Environmental —
Operating Temperature: 10° to 40° C (50° to 104° F);
Storage Temperature: 0° to 60° C (32° F to 140° F)

Dimensions —
CB-CP100: 4.3H x 10.5W x 9.2D cm
CB-CP200: 4.35H x 21W x 9.2D cm

Weight —
CB-CP100: 0.3 kg
CB-CP200: 0.5 kg

(1) ControlBridge® Processor
(2) IR adapters, CB-CP200 (4)
(1) Connector set (Phoenix connectors for I/O)
(1) Ethernet Cable
(1) PoE adapter plus power cable
(1) 24 VDC power supply