...combinations and which server was connected to which port—leading to many cryptic, scribbled notes attached to the switch and to the workstation. • Today's versions • But with the advent of on-screen menu's, an operator can use easy-to-read, pop-up...

...extendere, Device Server også Wireless, Console Servers, Hub og repeaters. Vores produktsortiment omfatter de ældre produkter som Token Ring til nutidens Multimode/Singlemode Fiber. • Du kan nedenfor se links til nogle af vores LAN produktgrup...

...to Send (RTS), and Data Terminal Ready (DTR) pins. • A few things to keep in mind • When using an interface-powered converter, there are a few things to keep in mind, such as how much power is available from the RS-232 port—and how much power is dis...

...send the authentication request to the authenticator. The authenticator passes the request to the authentication server to authenticate and verify, and the server tells the authenticator if the request for authorization for those ports is granted.

...equipment —especially servers— generates a lot of heat in a relatively small area. Today’s servers are smaller and have faster CPUs than ever. Because most of the power used by these devices is dissipated into the air as heat, they can really stra...

...purchasing decision. • Check out our IT knowledgebase for indepth info about the latest technologies, pin-outs, etc. Find detailed, easy to understand application diagrammes. • Please find our "Server"  topics on the left side of this page.

...remote sites to access servers, logic controllers, or any devices that require programming. • Diagnostics. From your master control room, you can probe servers and run diagnostics. • Matrix Switches • Matrix switches enable more than one device to ...

...As workstations and servers migrated from ordinary 10-Mbps Ethernet to 100-Mbps speeds, it became clear that even greater speeds were needed. Gigabit Ethernet was developed for an even faster Ethernet standard to handle the network traffic gener...