Newsletter
Tilbage > Information > Tekniske Resourcer > Black Box forklarer > Power > Why you should consider a UPS.
Menupunkter
 
Why you should consider a UPS.

Why you should consider a UPS


What it is

An uninterruptible power supply (UPS), also known as an uninterruptible power source or a battery backup, is a device that maintains a continuous supply of electric power to connected equipment by supplying power from a separate source when utility power is not available.


Types of UPSs
  • Standby — UPSs of this category pass the current during normal operation directly from the input to the output. Switching to battery operation takes up to 10 milliseconds. They only protect from power failures.
  • Line Interactive — They protect not only from power failure, but also from underand over-voltage. They are ideal for small to enterprise IT and network environments.
  • Double Conversion — These UPSs offer protection from all power problems. Suitable for mission-critical applications, server farms, hospitals, etc.

The average system is hit by 120 power disturbances per month

Downtime is unacceptable and often costly. But it’s impossible to get 99.9% uptime when you plug your hardware into an AC outlet.

Power problems are the most common cause of network interruptions. According to an IBM® study, the average system is hit by 120 power disturbances per month.


More common than you may know

Have you ever had to reset the clock on your VCR or seen the lights dim for a moment when the refrigerator kicks on? These are common occurrences that are insignificant at home but can cause a shutdown in your network. Many power disturbances are so short they’re invisible to the human eye, but they can make a router lock up or a switch require rebooting. Power problems are actually more common than you may know. For instance:

  • 34% of network downtime is because of bad power (IBM study).
  • 99% of power problems are brownouts (low voltage) or blackouts (complete outages). Only a UPS protects against those.
  • It takes 90.87 seconds for switches in non redundant networks to recover from power interruptions.
  • 45% of all data loss is caused by power problems.

More than 70% of servers are protected with a UPS

For a small fraction of the cost of your networking hardware, you can purchase a UPS that protects your network from blackouts, brownouts (low voltages), and surges—even lightning strikes!

To prevent power disasters before they happen, more than 70% of servers are protected with a UPS. Network managers know that having a server down brings many operations to a halt. Although the loss of a single hub or router may not bring the entire corporation to a standstill, it can result in zero productivity for entire workgroups or remote offices.


How can you tell if your system is suffering from power problems?

See if some of these symptoms are familiar: damaged hardware, numerous service calls, erratic operation, unexplained problems, unreliable data, system slowdown, damaged software, system lockups, and more.

If you’ve experienced some of these problems, you need a UPS. It will keep power flowing, giving you enough time to shut down safely during a power outage. It will also regulate your power, smoothing out dangerous overvoltages and undervoltages, spikes, surges, and impulses that often go unnoticed. These power anomalies can be caused internally by nearby machinery, fluorescent lights, and elevators, as well as externally from nearby transformer problems, lightning strikes, downed power lines, and more.


Data and equipment losses from power problems are preventable. Eliminate system downtime and increase profitability and productivity with a UPS.


When looking for a UPS, consider these steps:
  1. List all the equipment you have that needs protection. Remember to include monitors, terminals, hard drives, external modems, and any other equipment in the critical path of potential power or surge sources.
  2. Add up the total amperage ratings of your equipment. This information is probably imprinted on the back of each device.
  3. Multiply this total amperage figure by the operating voltage (typically 240 VAC in the U.K.) to obtain your total volt/amp (VA) requirement with a safety margin.
  4. Select a UPS with a VA capacity at least as high as the amount in Step 3. To accommodate for future expansion, it’s wise to order a device with an even larger VA rating.
  5. If you have questions about which UPS is right for you, contact Tech Support.